該頁(yè)無(wú)縮略圖
WallPlantHolder Instructions
In case of installation problems or any quality issues, simply contact us via our email:
| Outer Frame x3 | X2 Iron Pipe x3 | Planter Tray x1 |
| x2 1111 144 Self-tapping Screw x4 Wall Anchor x4 | ?2 Short Screw x2 | x2 L-shaped Allen Wrench x1 |
| Cross Screwdriverx1 | Long Screw x6 x2 Magnetic Light x1 Charging Cable x1 | Light Remote Controller x1 |
Operation of the Magnetic Light
With features strong magnetic stickers for a secure hold on any surface.
Lighting Control Guide
1.Power On: To use the light, please turn on the power switch first.
2.Two Control Modes: Manual touch control and remote control. Manual Touch Control: The raised area next to the light beads is the touch-sensitive control. Short-press to cycle through 4 preset colors.Long-press to adjust between 5 brightness levels.Remote Control: Use the remote to access 13 colors,adjust among 5 brightness levels, set a timer (30 or 60 minutes),and switch between steady， smooth fading,or flash lighting effects.
3. Charging: When the light gradually dims, it indicates low battery power, please charge it. The indicator light will turn red during charging and change to green when fully charged.
Remote Control Diagram
1.Please remove the insulation first.
2.Follow directions on back of remote control if need to replace battery ofthe remote.
3.The max control distance of the remote is19ft
4. On medium brightness,it lasts 26 hours. To reduce charging, turn on at night and off during the day.
AWARNING
· INGESTlON HAZARD: This product contains a button cell or coin battery.
in as little as 2 hours. 杭 · KEEP new and used batteries OUT OF REACH Of CHILDREN
· Seek immediate medical attention if a battery is suspected to be swallowed
or inserted inside any part of the body.
Keep in original package until ready to use;
Immediately dispose of used batteries and keep away from children.Do NOT dispose of batteries in household trash.
