該頁無縮略圖
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
KOOKC 三茂集團
ISO9001
ISO14001
EFFICIENT
AND BIO-BASED COMPATIBILIZER
高效 生物基相容劑
三茂新材料科技（無錫）有限公司
SANMAO NEW MATERIALS TECHNOLOGY (WUXI) CO., LTD
中國科學院寧波材料技術與工程研究所
提供界面調控定制化服務
公司簡介
COMPANY PROFILE COMPANY PROFILE
三茂新材料科技（無錫）有限公司（簡稱“三茂集團\"）總部位于江蘇無錫，是以中
國科學院寧波材料技術與工程研究所相關技術為核心的高新技術企業。公司專注于研發
和生產高性能、高效的材料助劑，現已形成四大核心產品系列：酸酐與環氧改性蠟、生
物基相容劑、永久抗靜電劑、PVC高分子助劑與配方訂制化服務，全面推動塑料及材料
產業的綠色轉型與功能升級。
企業宗旨：以\"愛、善、品\"行天下！
企業理念：品質至上，誠信為本！
Sanmao New Material Technology (Wuxi) Co., Ltd. (referred to as \"KOOKC\") is headquartered in Wuxi, Jiangsu Province.
It is a high-tech enterprise based on relevant technologies from the Ningbo Institute of Materials Technology & Engineering, CAS. The company focuses on the R&D and production of high-performance and efficient material additives. It has
now formed four core product series: anhydride and epoxy modified waxes, biobased compatibilizers, permanent anti-static agents, and PVC polymer additives and customized formulation services, comprehensively promoting the green
transformation and functional upgrading of the plastic and material industry.
Corporate mission: Act with Love, Kindness and Integrity across the World!
Corporate philosophy: Quality First, Integrity Foremost!
KOOKC 三茂集團
01 / www.kookc.com 生物基相容劑
BIOBASED COMPATIBILIZERS
www.kookc.com / 02
Bio-based compatibilizers are a type of compatibilizer based on bio-based polar monomers grafted onto polymer materials.
According to the differences in polar monomers and polymers, they can be classified as follows:
① Bio-based anhydride grafted olefin polymers compatibilizers, such as PP-g-BAH and PE-g-BAH.
② Bio-based anhydride grafted elastomers compatibilizers, such as SEBS-g-BAH, POE-g-BAH and EPDM-g-BAH.
③ Bio-based epoxy monomer grafted olefin polymers compatibilizers, such as PP-g-EIA and PE-g-EIA.
④ Bio-based epoxy monomer grafted elastomers compatibilizers, such as SEBS-g-EIA and POE-g-EIA.
⑤ Bio-based anhydride grafted biodegradable materials compatibilizers, such as PLA-g-BAH and PBAT-g-BAH.
⑥ Bio-based epoxy monomer grafted biodegradable materials compatibilizers, such as PLA-g-EIA and PBAT-g-EIA.
生物基相容劑，是基于生物基極性單體接枝高分子材料類的相容劑。
根據極性單體和高分子的不同，可以將其分為：
① 生物基酸酐接枝烯烴類高分子相容劑，如PP-g-BAH,PE-g-BAH等。
② 生物基酸酐接枝彈性體類相容劑，如SEBS-g-BAH,POE-g-BAH和EPDM-g-BAH等。
③ 生物基環氧單體接枝烯烴類相容劑，如PP-g-EIA,PE-g-EIA等。
④ 生物基環氧單體接枝彈性體類相容劑，如SEBS-g-EIA和POE-g-EIA等。
⑤ 生物基酸酐接枝可降解材料相容劑，如PLA-g-BAH和PBAT-g-BAH等。
⑥ 生物基環氧單體接枝可降解材料相容劑，如PLA-g-EIA和PBAT-g-EIA等。
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
Based on the biobased multi-epoxy monomer grafting technology, the product includes elastomer compatibilizer (Ebond-1001/1002) and
polylactic acid compatibilizer (Ebond-2001/2002). It features high epoxy value, high grafting ratio, and low odor, significantly improving
the material compatibility and impact resistance.
產品概述
Product overview
基于生物基多環氧單體接枝技術，包含彈性體相容劑 (Ebond-1001/1002) 和聚乳酸相容劑 (Ebond-2001/2002)。
具有高環氧值、高接枝率、低氣味特點，顯著提升材料相容性與抗沖擊性能。
核心優勢
Core advantage
高接枝率與環氧值
創新技術提升單體接枝率，性
能優于傳統產品。
Innovative technology enhances the monomer grafting ratio,
and the performance is superior
to that of traditional products.
Biobased grafting monomers
are used, environmental protection requirements are met, and
the odor is extremely low.
The impact resistance is
improved, the internal stress is
reduced, and the problems of
delamination and peeling are
solved.
低氣味與環保
采用生物基接枝單體，符合
環保要求，氣味極低。
高效增韌與相容
改善抗沖擊性能，降低內應
力，解決分層起皮問題。
High grafting ratio and epoxy value Low odor and environmental protection compliance Efficient toughening and compatibilization
核心性能特點
Core performance features
型號
Ebond-1001
Ebond-1002
Ebond-2001
Ebond-2002
類型
環氧接枝SEBS
超高效環氧接枝SEBS
環氧接枝聚乳酸
超高效環氧接枝聚乳酸
外觀
透明顆粒
透明顆粒
不透明顆粒
不透明顆粒
環氧值(10-2)
0.91-1.12
1.26-1.54
0.7-0.83
1.01-1.26
接枝率(%)
1.3-1.6
1.8-2.2
1.0-1.2
1.4-1.8
典型應用
工程塑料合金、聚酯材
料、金屬粘結
工程塑料合金、粘結劑、
擴鏈劑
PLA與PBAT/PBS復合、
纖維復合
PLA與樹脂復合、纖維復合
Epoxy grafted SEBS Transparent particles
Transparent particles
Opaque particles
Opaque particles Ultra-high efficiency epoxy
grafted polylactic acid PLA compounding with resin and fibers
PLA compounding with PBAT/PBS and fibers
Engineering plastic alloys, adhesives, chain
extenders
Engineering plastic alloys, polyester materials,
metal bonding
Epoxy grafted
polylactic acid
SEBS Ultra-high-efficiency
epoxy grafted SEBS
Model Type Appearance Epoxy value Grafting ratio Typical application
KOOKC 三茂集團 型號規格與性能參數對比
Model/specification and performance parameter comparison
型號
Ibond-1001
Ibond-1002
Ibond-2001
Ibond-2002
Ibond-3001
Ibond-3002
類型
均聚PP相容劑
高效均聚PP相容劑
共聚PP相容劑
高效共聚PP相容劑
彈性體相容劑
高效彈性體相容劑
典型應用
均聚PP/玻纖/礦物
高填充PP/PA粘接
共聚PP/可再生PP
各類填料復合/粘接
PA增韌/玻纖增強PA
超高接枝率PA復合
應用效果示例
30%GF+PP沖擊提升至10.44
30%GF+PP沖擊提升至12.38
20%GF+再生PP沖擊提升至11.9
麥秸粉+PP沖擊優于傳統相容劑
PA56常溫沖擊提升至14.1
增韌與相容效果更顯著
接枝率(%)
0.8-1.2
1.2-1.5
0.8-1.2
1.2-1.5
1.2-1.5
1.8-2.5
Model Type Grafting ratio Typical application Example of application effect
Homopolymer PP compatibilizer
High-efficiency homopolymer PP compatibilizer
Copolymer PP compatibilizer
High-efficiency copolymer PP compatibilizer
Elastomer compatibilizer
High-efficiency elastomer compatibilizer
Homopolymer PP/glass fiber/mineral
Highly filled PP / PA bonding
Copolymer PP/recyclable PP
Compounding/bonding of various fillers
PA toughening/glass fiber reinforced PA
Compounding of PA with ultra-high grafting ratio
30% GF + the impact resistance
of PP is increased to 10.44
30% GF + the impact resistance
of PP is increased to 12.38
+ the impact resistance of recycled
PP is increased to 11.9
Wheat straw powder + the impact resistance
of PP is superior to that of traditional compatibilizers
The impact resistance of PA56 at room
temperature is increased to 14.1
The toughening and compatibilization
effects are more significant
03 / www.kookc.com
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
優異的力學保持
Excellent mechanical retention
低氣味與低 VOC
Low odor and low VOC
高反應活性酸酐
Highly reactive anhydride
技術核心與優勢
Technical core and advantages
在提升相容性的同時，最大程
度保留基材剛性，甚至顯著提
升材料韌性。
符合嚴苛環保法規，專為汽車內
飾、家電外殼等對氣味敏感領域
設計。
自主合成新型單體，接枝效率
優于傳統MAH-G-PP，顯著
改善界面結合。
New monomers are independently synthesized, and the grafting efficiency is superior to that of traditional MAH-G-PP, significantly improving interface bonding.
The product is compliant with strict environmental protection regulations, and is specially
designed for odor-sensitive applications such
as automotive interiors and household appliance casings.
While enhancing compatibility, the
product maximally retains the rigidity of
the substrate and even significantly
improves the toughness of the material.
產品系列總結與應用領域
Product series summary and application fields
EBOND 系列 · 生物基多環氧單體接枝
彈性體相容劑 (1000系列)：適配SEBS、工程塑料合金、聚酯體系
Elastomer compatibilizer (1000 series): suitable for SEBS, engineering plastic alloys, and polyester systems
Polylactic acid compatibilizer (2000 series): focusing on the compounding of PLA with resin and inorganic/plant fibers
聚乳酸相容劑 (2000系列)：專注PLA與樹脂、無機/植物纖維復合
IBOND 系列 · 新型酸酐接枝技術
聚丙烯相容劑 (1000/2000系列)：PP與玻纖、礦物、植物纖維復合
彈性體相容劑 (3000系列)：尼龍增韌、玻纖增強PA增韌及多材料復合
核心優勢與應用領域
Core advantages and application fields
Ebond series · biobased multi-epoxy monomer grafting
Ibond series · new anhydride grafting technology
Polypropylene compatibilizer (1000/2000 series): PP compounding with glass fibers, minerals, and plant fibers
Elastomer compatibilizer (3000 series): nylon toughening, toughening of glass fiber reinforced PA, and multi-material compounding
1 技術領先 Leading in technology 2 性能卓越 Outstanding performance
3 綠色環保 Green and environmentally friendly 4 應用廣泛 Extensively applied
采用生物基單體與高活性酸酐，實現高接枝率，性能卓越。
By using biobased monomers and highly active anhydrides, a high
grafting ratio is achieved, resulting in excellent performance.
顯著提升界面相容性、抗沖擊強度及拉伸強度，改善加工性能。
The interface compatibility, impact resistance and tensile strength are
significantly enhanced, and the processing performance is improved.
低氣味、低VOC，符合ROHS等環保法規，助力可持續發展。
Low odor, low VOC, in compliance with environmental protection regulations such as RoHS, contributing to sustainable development.
覆蓋汽車、家電、包裝、3D打印及生物基材料等多個領域。
The product covers multiple fields such as automobiles, home appliances, packaging, 3D printing, and biobased materials.
www.kookc.com / 04
KOOKC 三茂集團
01 / www.kookc.com 高效新型酸酐接枝聚丙烯相容劑-1（均聚體系）
High-efficiency new anhydride grafted polypropylene compatibilizer -1 (homopolymer system)
Brand number
IBOND-1001
IBOND-1002
The grafting rate is 0.8%-1.2%, a medium grafting rate
The grafting rate is 1.2%-1.5%,a high grafting rate
牌號
Advantages
優點 采用新型酸酐和新型環氧共接枝PP，接枝率高，相容效果佳；
PP is co-grafted with a new type of anhydride and a new type of epoxy, featuring a high grafting rate and
excellent compatibility.
Application scenarios
應用場合 適用于PP復合材料體系，特別是均聚PP體系中，如玻纖增強均聚PP、PP-PA復合材料等；
It is applicable to PP composite material systems, especially in homopolymer PP systems, such as glass
fiber reinforced homopolymer PP, PP-PA composite materials, etc.
Suggested addition amount
建議添加量
◎應用案例 Application case 2%-7%，可替代傳統PP-MAH，添加量為傳統PP-MAH的60%-80%。
2%-7%, it can replace the traditional PP-MAH, and the addition amount is 60%-80% of the traditional
PP-MAH.
接枝率 0.8%-1.2%，中等接枝率
接枝率 1.2%-1.5%，高接枝率
相容劑方案
Compatibilizer scheme
不加相容劑
3%ibond
-1001
沖擊強度(KJ/M2)
Impact strength
5.34
10.44
12.38
拉伸強度(MPA)
Tensile strength
43.89
88.93
89.16
彎曲強度(MPA)
Bending strength
60.8
119.53
123.49
有效接枝率(%)
Effective grafting rate
效果
Effect
/
0.8-1.2
1.2-1.5
彎曲模量(MPA)
Bending modulus
4988.13
5440.64
5909.61
3%ibond
-1002
No compatibilizer is added
lbond-1系列，
均可以有效提升
玻纖增強均聚PP
的沖擊、拉伸和
彎曲性能。
The lbond-1 series
can all effectively
enhance the impact,
tensile and bending
properties of glass
fiber reinforced
homopolymer PP.
*30%玻纖增強均聚PP *30% glass fiber reinforced homopolymer PP
www.kookc.com / 02
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
◎應用案例 Application case
高效新型酸酐接枝聚丙烯相容劑-2（共聚體系）
High-efficiency new anhydride grafted polypropylene compatibilizer -2 (Copolymerization system)
Brand number
牌號
Advantages
優點
Application scenarios
應用場合
Suggested addition amount
建議添加量
相容劑方案
Compatibilizer scheme
不加相容劑
3%ibond
-2001
沖擊強度(KJ/M2)
Impact strength
5.7
11.9
13.26
拉伸強度(MPA)
Tensile strength
42.47
55.4
56.63
彎曲強度(MPA)
Bending strength
57.6
70.21
75.61
有效接枝率(%)
Effective grafting rate
效果
Effect
/
0.8-1.2
1.2-1.5
彎曲模量(MPA)
Bending modulus
3025
3193
3374.8
3%ibond
-2002
No compatibilizer is added
lbond-2系列可
以有效提升玻纖
增強可再生PP的
沖擊、拉伸和彎
曲性能。
The lbond-2 series
can effectively
enhance the impact,
tensile and bending
properties of glass
fiber reinforced
renewable PP.
IBOND-2001
IBOND-2002
The grafting rate is 0.8%-1.0%, a medium grafting rate
The grafting rate is 1.2%-1.5%, a high grafting rate
采用新型生物基酸酐接枝PP，接枝率高，相容效果佳，接枝過程中對PP降解程度低，能有效保持
PP基材的力學性能，并且低氣味；
The new type of bio-based anhydride is used to graft PP, which has a high grafting rate, excellent compatibility effect, low degradation
degree of PP during the grafting process, can effectively maintain the mechanical properties of the PP substrate, and has a low odor.
適用于PP復合材料體系，特別是共聚PP，如玻纖增強共聚PP、PP&PA、PP&EVOH以及植物纖
維復合PP等材料，其中在可再生PP中，適用性更優于IBOND-1系列；
It is applicable to PP composite material systems, especially copolymer PP, such as glass fiber reinforced copolymer PP, PP&PA, PP&EVOH
and plant fiber composite PP, etc. Among them, in renewable PP, its applicability is even better than that of the Ibond-1 series.
3%-5%，添加量為傳統PP-MAH的50%-70%。
3%-5%, and the addition amount is 50%-70% of the traditional PP-MAH.
接枝率0.8%-1.0%，中等接枝率
接枝率1.2%-1.5%，高接枝率
*20%玻纖增強可再生PP *20% glass fiber reinforced renewable PP
KOOKC 三茂集團 03 / www.kookc.com ◎應用案例 Application case
高效新型酸酐接枝聚丙烯相容劑-2（共聚體系）
High-efficiency new anhydride grafted polypropylene compatibilizer -2 (Copolymerization system)
Brand number
牌號
Advantages
優點
Application scenarios
應用場合
Suggested addition amount
建議添加量
*80%PA56+20%SEBS&IBOND-3002 *80%PA56+20%GF *70% PA56+30%PP
IBOND-3001
IBOND-3002
The grafting rate is 1.2%-1.5%, a high grafting rate
The grafting rate is 1.8%-2.5%, an extremely high grafting rate
采用新型酸酐接枝SEBS，接枝率超高，低氣味，相容效果和增韌效果佳；
The SEBS is grafted with a new type of anhydride, featuring an extremely high grafting rate, low odor, and excellent compatibility and toughening effects.
用于尼龍材料增韌、玻纖增強尼龍材料、尼龍復合材增韌增容、玻纖增強聚丙烯材料增韌增容等、
聚酯材料增韌增容?？梢杂行嵘嚓P(guān)材料的界面相容性和韌性。
It is used for toughening nylon materials, glass fiber reinforced nylon materials, nylon composite materials, glass fiber reinforced polypropylene materials, etc., as well as polyester materials. It can effectively enhance the interfacial compatibility and toughness of related materials.
3%-10%，可替代傳統POE-MAH和SEBS-MAH，也可以與SEBS進行復配使用。
3%-10%, it can replace the traditional POE-MAH and SEBS-MAH, and can also be used in combination with SEBS.
接枝率1.2%-1.5%，高接枝率
接枝率1.8%-2.5%，超高接枝率
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
www.kookc.com / 04
◎應用案例 Application case
相容劑方案
Compatibilizer scheme
不加相容劑
5%Ebond
-1001
沖擊強度(KJ/M2)
Impact strength
9.3
21
61.47
拉伸強度(MPA)
Tensile strength
52.4
58.7
57.13
彎曲強度(MPA)
Bending strength
53.14
97.98
126.31
有效接枝率(%)
Effective grafting rate
效果
Effect
/
1.0-1.3
1.3-1.6
彎曲模量(MPA)
Bending modulus
108
101
97
5%Ebond
-1002
No compatibilizer is added
新型環氧接枝SEBS
加入后，可以有效
提升聚酯復合材料
的抗沖擊性能和斷
裂伸長率，并且保
持原有的拉伸性能
和熱變形溫度
After the addition of the new
type of epoxy grafted SEBS, the
impact resistance and
elongation at break of polyester
composites can be effectively
enhanced, while maintaining the
original tensile properties and
heat deflection temperature
高效新型環氧接枝SEBS相容劑
High-efficiency and new type of epoxy grafting SEBS compatibilizer
Brand number
牌號
Advantages
優點
Application scenarios
應用場合
Suggested addition amount
建議添加量
EBOND-1001
EBOND-1002
The grafting rate was 1.0%-1.3%, a medium grafting rate
The grafting rate is 1.3%-1.6%, a high grafting rate
采用新型新型環氧接枝SEBS，環氧值高，低氣味，低VOC，相容效果佳；
The new type of epoxy grafted SEBS is adopted, featuring a high epoxy value, low odor, low VOC and excellent compatibility.
適用于聚酯復合材料和尼龍復合材料增韌增容體系，如PLA/PC復合、PET材料、PBT材料和
PC/ABS材料等；
It is applicable to the toughening and capacity expansion systems of polyester composite materials and nylon composite materials, such as
PLA/PC composites, PET materials, PBT materials and PC/ABS materials, etc.
5%-10%，可替代傳統SEBS-GMA和POE-GMA，添加量為傳統相容劑的60%-80%。
5%-10%, it can replace the traditional SEBS-GMA and POE-GMA, and the addition amount is 60%-80% of the traditional compatibilizer.
接枝率1.0%-1.3%，中等接枝率
接枝率1.3%-1.6%，高接枝率
*PLA:PC=1:1
KOOKC 三茂集團
01 / www.kookc.com Ebond-1001
高效環氧接枝SEBS相容劑
牌號：Ebond-1001 顏色：本色透明
◎產品概述
Ebond-1001是一款新型環氧單體接枝彈性體相容劑，為新型生物基多環氧單體接枝彈性體（SEBS）產品，顏色為本色透明，顆粒
狀，與傳統GMA-g-SEBS或GMA-g-SEBS相比，通過特殊的生物基接枝單體引入以及自主設計的全新引發劑，有效提高了單體的接枝率
和側鏈長度；使最終產品具高環氧值、高接枝率、低氣味、高效相容、高效增韌和粘結效果。
Ebond-1001 is a new type of epoxy monomer grafting elastomer compatibilizer. It is a new type of bio-based multi-epoxy monomer grafting elastomer (SEBS)
product. It is colorless and transparent in its original form, in a granular state. Compared with traditional GMA-g-SEBS or GMA-g-SEBS, through the introduction of
special bio-based grafting monomers and the use of an independently designed new initiator, the grafting rate and side chain length of the monomer have been
effectively increased; thus, the final product has a high epoxy value, high grafting rate, low odor, high compatibility, high impact resistance and bonding effect.
1. As a compatibilizer, it can be applied in various engineering plastic alloy materials, significantly enhancing the impact resistance and interfacial compatibility of
these materials, reducing internal stress, surface delamination and peeling issues. The recommended addition amount is 3-7%.
2. As a compatibilizer, it can be applied in various polyester materials such as PLA, PET, PC, PBT and PEF, significantly improving the impact resistance and
interfacial compatibility of polyester materials and polyester alloy materials. The recommended addition amount is 3-7%.
3. As a bonding agent, it can be used for the bonding between polymer materials and metals, or between other polymer materials. The recommended addition
amount is 5-10%.
· The product must not be exposed to direct sunlight or rain; it should be stored in a dry, ventilated environment with a temperature below 50℃.
· 25kg per bag.
◎典型應用
◎儲存條件與包裝
1.作為相容劑應用于各類工程塑料合金材料中，可以顯著提升工程塑料合金類材料的抗沖擊性能和界面相容性，降低合金材料內應
力、表面分層和起皮等問題，建議添加量3-7%；
2.作為相容劑應用于PLA、PET、PC、PBT和PEF等各類聚酯材料中，可以顯著提升聚酯材料以及聚酯合金材料的抗沖擊性能和界面
相容性，建議添加量為3-7%；
3.作為粘結應用于高分子材料與金屬、其他高分子材料之間的粘結作用，建議添加量在5-10%即可。
·產品不得暴曬、雨淋；需在干燥、通風，環境溫度小于 50℃下儲存； ·25kg/袋。
◎產品性能
性能
熔融指數（g/10min）
純化后環氧值（10-2）
純化后接枝率（%）
測試標準
ISO 1133
/
/
測試方法
190℃，5kg
/
/
典型值
2-3
0.91-1.12
1.30-1.60
HIGH-EFFICIENCY EPOXY-GRAFTED SEBS COMPATIBILIZER
Model number Color: Natural color, transparent
Product Overview
Product performance
Typical application
Storage conditions and packaging
Performance Testing standards Testing method Typical value
Melt Index
Purified epoxy value
Purified grafting rate
www.kookc.com / 02
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
Ebond-1002
超高效環氧接枝SEBS相容劑
牌號：Ebond-1002 顏色：本色透明
◎產品概述
Ebond-1002是一款新型環氧單體接枝彈性體相容劑，為新型生物基多環氧單體接枝彈性體（SEBS）產品，顏色為本色透明，顆粒
狀，與傳統GMA-g-SEBS或GMA-g-SEBS相比，通過特殊的生物基接枝單體引入以及自主設計的全新引發劑，有效提高了單體的接枝率
和側鏈長度；使最終產品具超高環氧值、超高接枝率、低氣味、高效相容、高效增韌和粘結效果。
Ebond-1002 is a new type of epoxy monomer grafting elastomer compatibilizer. It is a new type of bio-based multi-epoxy monomer grafting elastomer (SEBS)
product. It is colorless and transparent in its original form, in a granular state. Compared with traditional GMA-g-SEBS or GMA-g-SEBS, through the introduction of
special bio-based grafting monomers and the use of an independently designed new initiator, the grafting rate and side chain length of the monomer have been
effectively increased; thus, the final product has an extremely high epoxy value, an extremely high grafting rate, low odor, high compatibility, high impact toughness
and bonding effect.
1. As a compatibilizer, it can be applied in various engineering plastic alloy materials, significantly enhancing the impact resistance and interfacial compatibility of
these materials, reducing internal stress, surface delamination and peeling issues. The recommended addition amount is 2-5%.
2. When used as a compatibilizer in various polyester materials such as PLA, PET, PC, PBT and PEF, it can significantly improve the impact resistance and interfacial
compatibility of polyester materials and polyester alloy materials. The recommended addition amount is 2-5%.
3. As a bonding agent, it can be applied in the bonding between polymer materials and metals, or between other polymer materials. The recommended addition
amount is 3-7%.
4. It can also be used as a chain extender or chain extender auxiliary agent, effectively increasing the melt strength and viscosity of materials such as PET and PLA,
and improving the mechanical properties of the materials. The recommended addition amount is 0.5-2%.
· The product must not be exposed to direct sunlight or rain; it should be stored in a dry, ventilated environment with a temperature below 50℃.
· 25kg per bag.
◎典型應用
◎儲存條件與包裝
1.作為相容劑應用于各類工程塑料合金材料中，可以顯著提升工程塑料合金類材料的抗沖擊性能和界面相容性，降低合金材料內應
力、表面分層和起皮等問題，建議添加量2-5%；
2.作為相容劑應用于PLA、PET、PC、PBT和PEF等各類聚酯材料中，可以顯著提升聚酯材料以及聚酯合金材料的抗沖擊性能和界面
相容性，建議添加量為2-5%；
3.作為粘結應用于高分子材料與金屬、其他高分子材料之間的粘結作用，建議添加量在3-7%即可;
4.也可作為擴鏈劑或擴鏈劑輔助劑使用，有效提高如PET、PLA等材料的熔體強度和黏度，提高材料的力學性能，建議添加量
0.5-2%。
·產品不得暴曬、雨淋；需在干燥、通風，環境溫度小于 50℃下儲存； ·25kg/袋。
◎產品性能
性能
熔融指數（g/10min）
純化后環氧值（10-2）
純化后接枝率（%）
測試標準
ISO 1133
/
/
測試方法
190℃，5kg
/
/
典型值
1.5-2.5
1.26-1.54
1.8-2.2
ULTRA-EFFICIENT EPOXY-GRAFTED SEBS COMPATIBILIZER
Model number Color: Natural color, transparent
Product Overview
Product performance
Typical application
Storage conditions and packaging
Performance Testing standards Testing method Typical value
Melt Index
Purified epoxy value
Purified grafting rate
KOOKC 三茂集團 03 / www.kookc.com Ebond-2001
高效環氧接枝聚乳酸相容劑
牌號：Ebond-2001 顏色：本色透明
◎產品概述
Ebond-2001是一款新型環氧單體接枝聚乳酸相容劑，為新型生物基多環氧單體接枝聚乳酸產品，顏色為本色不透
明，顆粒狀，與傳統PLA-g-GMA相比，通過特殊的生物基接枝單體引入以及自主設計的全新引發劑，有效提高了單體的接
枝率和側鏈長度；使最終產品具高環氧值、高接枝率、低氣味、高效相容、高效增韌和粘結效果。
Ebond-2001 is a new type of epoxy monomer grafted polylactic acid compatibilizer. It is a new type of bio-based multi-epoxy monomer
grafted polylactic acid product. Its color is opaque in its natural state and it is in a granular form. Compared with the traditional PLA-g-GMA,
through the introduction of special bio-based grafting monomers and the self-designed new initiator, the grafting rate and side chain length
of the monomer have been effectively improved; thus, the final product has a high epoxy value, high grafting rate, low odor, high compatibility, high toughening efficiency and bonding effect.
1. As a compatibilizer, it is applied in the composites of polylactic acid and various resins, such as polylactic acid and PBAT, PBS, PHA, and PHB. It can significantly
enhance the impact resistance and interfacial compatibility of polylactic acid alloy materials, reduce internal stress, surface delamination and peeling in the alloy
materials, and the recommended addition amount is 4-7%.
2. As a compatibilizer, it is applied in the composites of PLA and various inorganic fillers and plant fibers, such as talc, calcium carbonate, starch and various plant
fibers, which can significantly improve the interfacial compatibility of polylactic acid and various fillers, thereby enhancing the mechanical properties and interfacial
compatibility of polylactic acid composite materials. The recommended addition amount is 4-7%.
· The product must not be exposed to direct sunlight or rain; it should be stored in a dry, ventilated environment with a temperature below 50℃.
· 25kg per bag.
◎典型應用
◎儲存條件與包裝
1.作為相容劑應用于聚乳酸和各類樹脂復合中，如聚乳酸和PBAT、PBS、PHA和PHB等?？梢燥@著提升聚乳酸合金
類材料的抗沖擊性能和界面相容性，降低合金材料內應力、表面分層和起皮等問題，建議添加量4-7%；
2.作為相容劑應用于PLA和各類無機填充和植物纖維復合中，如滑石粉、碳酸鈣、淀粉和各類植物纖維等，可以顯著提
升聚乳酸和各類填充的界面相容性，從而提升聚乳酸復合材料的力學性能性能和界面相容性，建議添加量為4-7%。
·產品不得暴曬、雨淋；需在干燥、通風，環境溫度小于 50℃下儲存； ·25kg/袋。
◎產品性能
性能
熔融指數（g/10min）
純化后環氧值（10-2）
純化后接枝率（%）
測試標準
ISO 1133
/
/
測試方法
190℃，5kg
/
/
典型值
10-15
0.7-0.83
1.0-1.2
HIGH-EFFICIENCY EPOXY-GRAFTED POLYLACTIC ACID COMPATIBILIZER
Model number Color: Natural color, transparent
Product Overview
Product performance
Typical application
Storage conditions and packaging
Performance Testing standards Testing method Typical value
Melt Index
Purified epoxy value
Purified grafting rate
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
www.kookc.com / 04
Ebond-2002
超高效環氧接枝聚乳酸相容劑
牌號：Ebond-2002 顏色：本色透明
◎產品概述
Ebond-2001是一款新型環氧單體接枝聚乳酸相容劑，為新型生物基多環氧單體接枝聚乳酸產品，顏色為本色不透
明，顆粒狀，與傳統PLA-g-GMA相比，通過特殊的生物基接枝單體引入以及自主設計的全新引發劑，有效提高了單體的接
枝率和側鏈長度；使最終產品具高環氧值、高接枝率、低氣味、高效相容、高效增韌和粘結效果。
Ebond-2001 is a new type of epoxy monomer grafted polylactic acid compatibilizer. It is a new type of bio-based multi-epoxy monomer
grafted polylactic acid product. Its color is opaque in its natural state and it is in a granular form. Compared with the traditional PLA-g-GMA,
through the introduction of special bio-based grafting monomers and the self-designed new initiator, the grafting rate and side chain length
of the monomer have been effectively improved; thus, the final product has a high epoxy value, high grafting rate, low odor, high compatibility, high toughening efficiency and bonding effect.
1. As a compatibilizer, it is applied in the composites of polylactic acid and various resins, such as polylactic acid and PBAT, PBS, PHA, and PHB. It can significantly
enhance the impact resistance and interfacial compatibility of polylactic acid alloy materials, reduce internal stress, surface delamination and peeling in the alloy
materials, and the recommended addition amount is 3-6%.
2. As a compatibilizer, it is applied in the composites of PLA and various inorganic fillers and plant fibers, such as talc, calcium carbonate, starch and various plant
fibers, which can significantly improve the interfacial compatibility of polylactic acid and various fillers, thereby enhancing the mechanical properties and interfacial
compatibility of polylactic acid composite materials. The recommended addition amount is 3-6%.
· The product must not be exposed to direct sunlight or rain; it should be stored in a dry, ventilated environment with a temperature below 50℃.
· 25kg per bag.
◎典型應用
◎儲存條件與包裝
1.作為相容劑應用于聚乳酸和各類樹脂復合中，如聚乳酸和PBAT、PBS、PHA和PHB等?？梢燥@著提升聚乳酸合金
類材料的抗沖擊性能和界面相容性，降低合金材料內應力、表面分層和起皮等問題，建議添加量3-6%；
2.作為相容劑應用于PLA和各類無機填充和植物纖維復合中，如滑石粉、碳酸鈣、淀粉和各類植物纖維等，可以顯著提
升聚乳酸和各類填充的界面相容性，從而提升聚乳酸復合材料的力學性能性能和界面相容性，建議添加量為3-6%。
·產品不得暴曬、雨淋；需在干燥、通風，環境溫度小于 50℃下儲存； ·25kg/袋。
◎產品性能
性能
熔融指數（g/10min）
純化后環氧值（10-2）
純化后接枝率（%）
測試標準
ISO 1133
/
/
測試方法
190℃，5kg
/
/
典型值
10-15
1.01-1.26
1.4-1.8
SUPER-EFFICIENT EPOXY-GRAFTED POLYLACTIC ACID COMPATIBILIZER
Model number Color: Natural color, transparent
Product Overview
Product performance
Typical application
Storage conditions and packaging
Performance Testing standards Testing method Typical value
Melt Index
Purified epoxy value
Purified grafting rate
KOOKC 三茂集團
01 / www.kookc.com Ibond-1001
高效酸酐接枝聚丙烯類相容劑
牌號：Ibond-1001 顏色：淺黃色
◎產品概述
Ibond-1001是一款高效相容劑，為新型酸酐接枝聚丙烯（PP）產品，顏色為淺黃色，與傳統MAH-g-PP相比，通過自主合成的新型
低氣味、低揮發性和高反應活性酸酐的引入，使之具有中等接枝率（0.8%-1.2%）、低氣味和低VOC的特點，并且最大程度保持PP材料接
枝前后的力學性能。同時中等接枝率可以有效提升PP產品與其他材料的界面相容性，從而提升PP材料的各項性能。
Ibond-1001 is an efficient compatibilizer. It is a new type of acid anhydride grafted polypropylene (PP) product. Its color is light yellow. Compared with the traditional
MAH-g-PP, by introducing an independently synthesized new type of low odor, low volatility and high reactivity acid anhydride, it has a medium grafting rate
(0.8%-1.2%), low odor and low VOC characteristics, and maintains the mechanical properties of the PP material before and after grafting to the greatest extent. At
the same time, the medium grafting rate can effectively improve the interfacial compatibility of PP products with other materials, thereby enhancing the
performance of PP materials.
1. As a compatibilizer, it is applied in composite homogeneous polypropylene (PP) materials such as glass fiber, plant fiber, talcum powder and calcium carbonate,
significantly improving the mechanical properties of the composite PP materials, such as tensile strength and impact strength. The recommended addition amount
is 3% - 7%.
2. As a bonding resin, it is applied in the bonding of PP/PA and PP/EVOH material layers, significantly enhancing the processing performance and mechanical
properties of the raw materials. The recommended addition amount is 3% - 7%.
◎典型應用
1.作為相容劑應用于玻纖、植物纖維、滑石粉和碳酸鈣等復合均聚聚丙烯（PP）材料中，顯著改善復合PP材料的力學性能，如拉伸強
度和沖擊強度等，建議添加量在3%-7%即可；
2.作為粘接性樹脂應用于 PP/PA 及 PP/EVOH 材料層的粘接，顯著提升原材料的加工性能和力學性能，建議添加量3%-7%即可。
◎產品性能
性能
熔融指數（g/10min）
純化后接枝率（%）
測試標準
ISO 1133
/
測試方法
190℃，2.16kg
酸堿滴定法
典型值
20-30
0.8-1.2
HIGH-EFFICIENCY ACID ANHYDRIDE GRAFTED POLYPROPYLENE COMPATIBILIZER
Model number Color: Light yellow
Product Overview
Product performance
Typical application
Adding 3% Ibond-1001 to 30% glass fiber reinforced homopolymer PP can result in a cold-temperature impact strength of 13 J/m2. Compared with no compatibilizer addition or with the addition of other compatibilizers, the impact strength, tensile strength and bending strength have significantly improved.
◎應用示例
30%玻纖增強均聚PP添加3% Ibond-1001，常溫沖擊可達到13J/m2，較不加相容劑和添加，沖擊強度、拉伸強度和彎曲強度有明顯
提升；
Application Example
Performance Testing standards Testing method Typical value
Melt Index
Purified grafting rate
方案（PP+30%GF）
不加相容劑
3% Ibond-1001
常溫沖擊(kJ/m2)
5.34
10.44
拉伸強度(MPa)
43.89
88.93
拉伸模量(MPa)
7324.20
7118.95
彎曲強度(MPa)
60.08
119.53
彎曲模量(MPa)
4988.13
5440.64
斷裂伸長率(%)
2.41
2.38
Plan Room temperature impact Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
www.kookc.com / 02
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
Ibond-1002
超高效酸酐接枝聚丙烯類相容劑
牌號：Ibond-1002 顏色：淺黃色
◎產品概述
Ibond-1002是一款高效相容劑，為新型酸酐接枝聚丙烯（PP）產品，顏色為淺黃色，與傳統MAH-g-PP相比，通過自主合成的新型
低氣味、低揮發性和高反應活性酸酐的引入，使之具有高接枝率（1.2%-1.5%）、低氣味和低VOC的特點，并且具有優異的相容性提升效
果。
Ibond-1002 is an efficient compatibilizer. It is a new type of acid anhydride grafted polypropylene (PP) product. Its color is light yellow. Compared with the traditional
MAH-g-PP, by introducing an independently synthesized new type of low-odor, low-volatile and highly reactive acid anhydride, it has high grafting rate (1.2%-1.5%),
low odor and low VOC characteristics, and also has an excellent compatibility improvement effect.
1. As a compatibilizer, it is applied in composite homogeneous polypropylene (PP) materials such as glass fiber, plant fiber, talcum powder and calcium carbonate,
significantly improving the mechanical properties of the composite PP materials, such as tensile strength and impact strength. The recommended addition amount
is 2% - 5%.
2. As a bonding resin, it is applied in the bonding of PP/PA and PP/EVOH material layers, significantly enhancing the processing performance and mechanical
properties of the raw materials. The recommended addition amount is 3% - 7%.
◎典型應用
1.作為相容劑應用于玻纖、植物纖維、滑石粉和碳酸鈣等復合均聚聚丙烯（PP）材料中，顯著改善復合PP材料的力學性能，如拉伸強
度和沖擊強度等，建議添加量在2%-5%即可；
2.作為粘接性樹脂應用于 PP/PA 及 PP/EVOH 材料層的粘接，顯著提升原材料的加工性能和力學性能，建議添加量3%-7%即可。
◎產品性能
性能
熔融指數（g/10min）
純化后接枝率（%）
測試標準
ISO 1133
/
測試方法
190℃，2.16kg
酸堿滴定法
典型值
20-30
1.2-1.5
ULTRA-EFFICIENT ACID ANHYDRIDE GRAFTED POLYPROPYLENE COMPATIBILIZER
Model number Color: Light yellow
Product Overview
Product performance
Typical application
When 30% glass fiber reinforced homopolymer PP is added with 3% Ibond-1001, the impact resistance at room temperature can reach 12.4 J/m2. Compared with
the case without adding compatibilizer, the impact strength, tensile strength and bending strength have significantly improved.
◎應用示例
30%玻纖增強均聚PP添加3% Ibond-1001，常溫沖擊可達到12.4J/m2，較不添加相容劑，沖擊強度、拉伸強度和彎曲強度有明顯提
升；
Application Example
Performance Testing standards Testing method Typical value
Melt Index
Purified grafting rate
方案（PP+30%GF）
不加相容劑
3% Ibond-1002
常溫沖擊(kJ/m2)
5.34
12.38
拉伸強度(MPa)
43.89
89.16
拉伸模量(MPa)
7324.20
6702.75
彎曲強度(MPa)
60.08
123.49
彎曲模量(MPa)
4988.13
5909.61
斷裂伸長率(%)
2.41
2.71
Plan Room temperature impact Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
KOOKC 三茂集團 03 / www.kookc.com Ibond-2001
高效酸酐接枝聚丙烯相容劑
牌號：Ibond-2001 顏色：淺黃色
◎產品概述
Ibond-2001是一款高效相容劑，為新型酸酐接枝聚丙烯（PP）產品，顏色為淺黃色，與傳統MAH-g-PP相比，通過自主合成的生物
基新型低氣味、低揮發性和高反應活性酸酐的引入，使之具有高接枝率、低氣味、低融指和高溶體強度的特點，并且相容劑本身保持了接
枝前PP的高抗沖和高強度的優點。
Ibond-2001 is an efficient compatibilizer. It is a new type of acid anhydride grafted polypropylene (PP) product. Its color is light yellow.
Compared with the traditional MAH-g-PP, by introducing an independently synthesized bio-based new type of low odor, low volatility and
high reactivity acid anhydride, it has the characteristics of high grafting rate, low odor, low melt flow index and high melt strength. Moreover,
the compatibilizer itself retains the high impact resistance and high strength advantages of the PP before grafting.
1. As a compatibilizer, it is applied in composite copolymer polypropylene (PP) materials such as glass fiber and plant fiber, significantly improving the mechanical
properties of the composite PP materials, such as tensile strength, elongation at break, and impact strength, and the recommended addition amount is 3% - 7%.
2. As a bonding resin, it is applied in the bonding of PP/PA and PP/EVOH material layers, significantly enhancing the processing performance and mechanical
properties of the raw materials. The recommended addition amount is 3% - 7%.
3. As an interface compatibilizer for renewable polypropylene materials, it has unique advantages. It can not only improve the compatibility and mechanical
properties of inorganic composite - polypropylene materials and polypropylene and other high-molecular alloy materials, but also enhance the melt strength and
mechanical properties of polypropylene materials.
◎典型應用
1.作為相容劑應用于玻纖、植物纖維等復合共聚聚丙烯（PP）材料中，顯著改善復合PP材料的力學性能，如拉伸強度、斷裂伸長率和
沖擊強度等，建議添加量在3%-7%即可；
2.作為粘接性樹脂應用于 PP/PA 及 PP/EVOH 材料層的粘接，顯著提升原材料的加工性能和力學性能，建議添加量3%-7%即可；
3.作為可再生聚丙烯材料的界面相容劑，具有得天獨厚的優勢，不僅可以提升無機復合-聚丙烯材料和聚丙烯和其他高分子合金材料的
相容性和力學性能，還可以提升聚丙烯材料的溶體強度和力學性能。
◎產品性能
性能
熔融指數（g/10min）
純化后接枝率（%）
測試標準
ISO 1133
/
測試方法
190℃，2.16kg
/
典型值
20-25
0.8-1.2
HIGH-EFFICIENCY ACID ANHYDRIDE GRAFTED POLYPROPYLENE COMPATIBILIZER
Model number Color: Light yellow
Product Overview
Product performance
Typical application
Performance Testing standards Testing method Typical value
Melt Index
Purified grafting rate
方案（PP+30%GF）
不加相容劑
3% Ibond-2001
常溫沖擊(kJ/m2)
5.7
11.9
拉伸強度(MPa)
42.47
55.4
拉伸模量(MPa)
4253.89
4440.21
彎曲強度(MPa)
57.6
70.21
彎曲模量(MPa)
3025
3374.8
斷裂伸長率(%)
2.41
75.61
Plan Room temperature impact Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
www.kookc.com / 04
Ibond-2002
高效酸酐接枝聚丙烯相容劑
牌號：Ibond-2002 顏色：淺黃色
◎產品概述
Ibond-2002是一款高效相容劑，為新型生物基酸酐接枝聚丙烯（PP）產品，顏色為淺黃色，與傳統MAH-g-PP相比，通過特殊的生
物基酸酐和特殊的第三單體引入，以及自主設計的全新引發劑，有效提高了酸酐的接枝率和側鏈長度；使最終產品具有高接枝率、低熔融
指數、高熔體強度和低氣味和高抗沖等優點?？梢宰畲蠓忍嵘齈P材料和其他無機、高分子材料復合的界面相容性和力學性能。
Ibond-2002 is an efficient compatibilizer. It is a new type of bio-based anhydride-grafted polypropylene (PP) product. Its color is light yellow.
Compared with the traditional MAH-g-PP, through the introduction of special bio-based anhydride and special third monomer, as well as the
self-designed new initiator, it effectively increases the grafting rate and side chain length of the anhydride; thus, the final product has the
advantages of high grafting rate, low melt index, high melt strength, low odor, and high impact resistance. It can significantly enhance the
interfacial compatibility and mechanical properties of PP materials and other inorganic and polymer materials composites.
1. As a compatibilizer, it is applied in composite polypropylene (PP) materials such as glass fiber, talc powder, calcium carbonate and plant fibers, significantly improving the mechanical properties of the composite PP materials, such as elongation at break and impact strength, and the recommended addition amount is 2% - 5%.
2. As a bonding resin, it is applied in the bonding of PP/PA and PP/EVOH material layers, significantly enhancing the processing performance and mechanical properties of the raw
materials, and the recommended addition amount is 2% - 5%.
◎典型應用
1.作為相容劑應用于玻纖、滑石粉、碳酸鈣和植物纖維等復合聚丙烯（PP）材料中，顯著改善復合PP材料的力學性能，如斷裂伸長率
和沖擊強度等，建議添加量在2%-5%即可；
2.作為粘接性樹脂應用于 PP/PA 及 PP/EVOH 材料層的粘接，顯著提升原材料的加工性能和力學性能，建議添加量2%-5%即可。
Adding 3% Ibond-2002 to a PP with about 20% glass fiber content can result in a constant-temperature impact resistance of 26.2 kJ/m2. This can effectively
enhance the material's notch impact strength, tensile strength, elongation at break, and bending strength.
20%左右玻纖含量的PP添加3% Ibond-2002，常溫沖擊可達到26.2kJ/m2，可以有效提升材料的缺口沖擊強度、拉伸強度、斷裂伸
長率和彎曲強度；
◎產品性能
性能
熔融指數（g/10min）
純化后接枝率（%）
缺口沖擊強度（kJ/cm2）
拉伸強度（MPa）
測試標準
ISO 1133
/
ISO 180
ISO 527
測試方法
210℃，2.16Kg
酸堿滴定法
懸臂梁，2mm缺口
50mm/min
典型值
25-35
1.2-1.5
≥40
≥15
ULTRA-EFFICIENT ACID ANHYDRIDE GRAFTED POLYPROPYLENE COMPATIBILIZER
Model number Color: Light yellow
Product Overview
Product performance
Typical application
Performance Testing standards Testing method Typical value
Melt Index
Grafting Rate after Purification
Notched Impact Strength
Tensile Strength
方案（PP+30%GF）
不加相容劑
3% Ibond-2001
常溫沖擊(kJ/m2)
5.7
11.9
拉伸強度(MPa)
42.47
55.4
拉伸模量(MPa)
4253.89
4440.21
彎曲強度(MPa)
57.6
70.21
彎曲模量(MPa)
3025
3374.8
斷裂伸長率(%)
2.41
75.61
Plan Room temperature impact Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
KOOKC 三茂集團
01 / www.kookc.com Adding about 20% wheat straw powder to PP and 2% Ibond-2002, compared to not adding any compatibilizer or adding 5% traditional
PP-g-MAH, significantly improves the impact resistance of the composite material. By combining with SEM scanning electron microscope
images, it can be observed that when 2% Ibond-2002 is added, there is no obvious separation between the wheat straw powder and the PP
matrix, and the interface compatibility effect is better.
◎應用示例
20%左右麥秸粉復合PP，2%的Ibond-2002的加入，較不加相容劑以及加5%傳統PP-g-MAH，大幅度提升復合材料
的抗沖擊強度；結合SEM掃描電鏡圖可看出，添加2%Ibond-2002，麥稈粉與PP基體無明顯分離，界面相容性效果更好
Application Example
方案
麥稈PP+2%Ibond-2002
麥稈PP+5%PP-g-MAH
常溫沖擊(kJ/m2)
8.55
7.78
拉伸強度(MPa)
21.3
20.9
拉伸模量(MPa)
1258.2
1207.4
彎曲強度(MPa)
28.3
27.5
彎曲模量(MPa)
1431
1339
斷裂伸長率(%)
7.8
5.7
Plan Room temperature impact Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
Approximately 20% coconut fiber composite PP material, with 3% addition of Ibond-2002. Compared to not adding any compatibilizer and
adding 5% traditional PP-g-MAH compatibilizer, there is no significant separation between the coconut fibers and the PP matrix. The interfacial compatibility is significantly improved, and the impact strength at low temperature (-20℃/4h) also shows a significant increase, from
13.3 kJ/m2 to 17.8 kJ/m2.
20%左右椰絲復合PP材料，3%的Ibond-2002的加入，較不加相容劑和加5%傳統PP-g-MAH相容劑，椰絲和PP基體
無明顯分離，大幅度提升界面相容性，并且低溫（-20℃/4h）抗沖擊強度也有顯著提升，從13.3kJ/m2提升至
17.8kJ/m2。
方案
椰絲PP+3% Ibond-2002
椰絲PP+5% PP-g-MAH
低溫（-20℃/4h）
17.8
13.3
拉伸強度(MPa)
14.2
13.2
拉伸模量(MPa)
751
735
彎曲強度(MPa)
19.8
20.1
彎曲模量(MPa)
699
687
斷裂伸長率(%)
9.8
8
Plan 沖擊（kJ/m2）
常溫沖擊(kJ/m2)
26
23.5
Room temperature impact Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
· The product must not be exposed to direct sunlight or rain; it should be stored in a dry, ventilated environment with a temperature below 50℃.
· 25kg per bag.
◎儲存條件與包裝
·產品不得暴曬、雨淋；需在干燥、通風，環境溫度小于 50℃下儲存； ·25kg/袋。
Storage conditions and packaging
www.kookc.com / 02
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
Ibond-3001
高效酸酐接枝彈性體相容劑
牌號：Ibond-3001 顏色：淺黃色
◎產品概述
Ibond-1002是一款高效相容劑，為新型酸酐接枝聚丙烯（PP）產品，顏色為淺黃色，與傳統MAH-g-PP相比，通過
自主合成的新型低氣味、低揮發性和高反應活性酸酐的引入，使之具有高接枝率（1.2%-1.5%）、低氣味和低VOC的特
點，并且具有優異的相容性提升效果。
Ibond-1002 is an efficient compatibilizer. It is a new type of acid anhydride grafted polypropylene (PP) product. Its color is light yellow.
Compared with the traditional MAH-g-PP, by introducing an independently synthesized new type of low-odor, low-volatile and highly reactive
acid anhydride, it has high grafting rate (1.2%-1.5%), low odor and low VOC characteristics, and also has an excellent compatibility improvement effect.
1. It can be used as a toughening and compatibilizing agent for nylon materials. It can be used alone as a compatibilizer or be compounded
with SEBS for use. When used alone, the recommended addition amount is 5-10%. When used in combination with SEBS, the recommended
addition amount of SEBS is 5%-20%, and the addition amount of the compatibilizer is 5%-10%.
2. As a toughening and compatibilizing agent for glass fiber reinforced nylon materials, it can effectively enhance the compatibility between
glass fibers and nylon, and as a toughening component, it can improve the toughness. The recommended addition amount is 3%-7%.
3. As a toughening and compatibilizing agent for nylon materials and other high molecular materials such as PP, PE, ABS, etc., it can
effectively enhance the interface compatibility and toughness of the composite materials. The recommended addition amount is 4%-10%.
◎典型應用
1，可以作為尼龍類材料的增韌相容劑，可以單獨作為相容劑使用，也可以與SEBS復配進行使用，單獨使用時，建議
添加量為5-10%，與SEBS復配使用時，建議SEBS添加量為5%-20%，相容劑添加量為5%-10%；
2，作為玻纖增強尼龍材料增韌相容劑使用，可以有效提升玻纖和尼龍之間的相容性，并且作為增韌組分提升韌性，建
議添加量為3%-7%；
3，作為尼龍材料和其他高分子材料，如PP、PE、ABS等材料復合式的增韌相容劑使用，可以有效提升復合材料的界
面相容性和韌性，建議添加量4%-10%。
◎產品性能
性能
熔融指數（g/10min）
純化后接枝率（%）
測試標準
ISO 1133
/
測試方法
190℃，5kg
/
典型值
4-7
1.20-1.50
HIGH-EFFICIENCY ACID ANHYDRIDE GRAFTED ELASTOMER COMPATIBILIZER
Model number Color: Light yellow
Product Overview
Product performance
Typical application
Performance Testing standards Testing method Typical value
Melt Index
Purified grafting rate
KOOKC 三茂集團 03 / www.kookc.com ◎應用示例1----PA56增韌 Example Application 1 - PA56 Toughening
· The product must not be exposed to direct sunlight or rain; it should be stored in a dry, ventilated environment with a temperature below 50℃.
· 25kg per bag.
◎儲存條件與包裝
·產品不得暴曬、雨淋；需在干燥、通風，環境溫度小于 50℃下儲存； ·25kg/袋。
Storage conditions and packaging
方案（PA56增韌）
不加相容劑
7.5% Ibond-3001
12.5%SEBS + 7.5% Ibond-3001
常溫(kJ/m2) -20℃
（kJ/m2）
5.3
14.1
40.3
3.1
9.3
31.3
拉伸強度
(MPa)
73.4
69.2
55.7
拉伸模量
(MPa)
2842.3
2612.1
1885.2
彎曲強度
(MPa)
110.6
92.4
74.2
彎曲模量
(MPa)
2705
2432.1
1742.13
斷裂伸長率
(%)
3.3
7.8
14.1
懸臂梁缺口沖擊
Solution (PA56 Toughening) Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
Cantilever beam impact at notch
Room temperature
◎應用示例2----30%玻纖增強PA6 Application Example 2 - 30% Glass Fiber Reinforced PA6
方案（30%GF+PA6）
不加相容劑
3% Ibond-3001
常溫(kJ/m2) -20℃
（kJ/m2）
18.3
24.3
12.2
17.43
拉伸強度
(MPa)
179.2
171.6
拉伸模量
(MPa)
10115.9
9436.8
彎曲強度
(MPa)
259.9
218.9
彎曲模量
(MPa)
8613.1
7205
斷裂伸長率
(%)
3.5
4.6
懸臂梁缺口沖擊
Solution（30%GF+PA6） Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
Cantilever beam impact at notch
Room temperature
◎應用示例3----30%PP復合PA56 Application Example 3 - 30% PP Composite PA56
方案（30%GF+PA6）
不加相容劑
4% Ibond-3001
6% Ibond-3001
8% Ibond-3001
10% Ibond-3001
常溫(kJ/m2) -20℃
（kJ/m2）
5
8.7
14.9
18.9
23.9
2.2
6.4
12.3
16.9
21.3
拉伸強度
(MPa)
56.8
46.5
46.3
45.2
44.3
拉伸模量
(MPa)
1809.3
1669.1
1591.9
1515.2
1446.4
彎曲強度
(MPa)
78
65.7
64.1
61.4
59.1
彎曲模量
(MPa)
2216
1582.8
1528.9
1458.2
1408.8
斷裂伸長率
(%)
8.2
18.1
18.9
15.1
19.1
懸臂梁缺口沖擊
Solution（30%GF+PA6） Tensile strength Tensile modulus Tensile elongation Bending strength Bending modulus
Cantilever beam impact at notch
Room temperature
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
www.kookc.com / 04
Ibond-3002
超高效酸酐接枝彈性體相容劑
牌號：Ibond-3002 顏色：淺黃色
◎產品概述
Ibond-3002是一款新型酸酐接枝SEBS彈性體相容劑，顏色為淺黃色，具有超高有效接枝率（1.8%-2.5%）、低氣味
和低VOC的特點。在大幅度提升材料相容性的同時，可以大幅度提升材料的韌性和回彈性。
Ibond-3002 is a new type of anhydride-grafted SEBS elastomer compatibilizer. It is light yellow in color and features an extremely high
effective grafting rate (1.8%-2.5%), low odor and low VOC. While significantly enhancing the material's compatibility, it can also greatly
improve the material's toughness and resilience.
1. It can be used as a toughening and compatibilizing agent for nylon materials. It can be used alone as a compatibilizer or be compounded
with SEBS for use. When used alone, the recommended addition amount is 5-10%. When used in combination with SEBS, the recommended
addition amount of SEBS is 5%-12.5%, and the addition amount of the compatibilizer is 5%-7.5%.
2. As a toughening and compatibilizing agent for glass fiber reinforced nylon materials, it can effectively enhance the compatibility between
glass fibers and nylon, and as a toughening component, it can improve the toughness. The recommended addition amount is 3%-6%.
3. As a toughening and compatibilizing agent for nylon materials and other high molecular materials such as PP, PE, ABS, etc., it can
effectively enhance the interface compatibility and toughness of the composite materials. The recommended addition amount is 4%-10%.
◎典型應用
1，可以作為尼龍類材料的增韌相容劑，可以單獨作為相容劑使用，也可以與SEBS復配進行使用，單獨使用時，建議
添加量為5-10%，與SEBS復配使用時，建議SEBS添加量為5%-12.5%，相容劑添加量為5%-7.5%；
2，作為玻纖增強尼龍材料增韌相容劑使用，可以有效提升玻纖和尼龍之間的相容性，并且作為增韌組分提升韌性，建
議添加量為3%-6%；
3，作為尼龍材料和其他高分子材料，如PP、PE、ABS等材料復合式的增韌相容劑使用，可以有效提升復合材料的界
面相容性和韌性，建議添加量4%-10%；
◎產品性能
性能
熔融指數（g/10min）
純化后接枝率（%）
測試標準
ISO 1133
/
測試方法
190℃，5kg
/
典型值
2-4
1.80-2.50
ULTRA-EFFICIENT ACID ANHYDRIDE GRAFTED ELASTOMER COMPATIBILIZER
Model number Color: Light yellow
Product Overview
Product performance
Typical application
Performance Testing standards Testing method Typical value
Melt Index
Purified grafting rate
KOOKC 三茂集團
01 / www.kookc.com ◎應用示例1----PA56增韌 Application Example 1 - PA56 Toughening
◎應用示例2----30%玻纖增強PA56 Application Example 2 - 30% Glass Fiber Reinforced PA56
◎應用示例3----30%PP復合PA56 Application Example 3 - 30% PP Composite PA56
沖擊強度/融指趨勢圖 拉伸性能趨勢圖
沖擊強度趨勢圖 拉伸性能趨勢圖
沖擊強度趨勢圖 拉伸性能趨勢圖
Trend chart of impact strength Trend chart of tensile properties
Trend chart of tensile properties
Trend chart of tensile properties
Trend chart of impact strength
Impact strength / Flow index trend graph
www.kookc.com / 02
提供界面調控定制化服務
PROVIDE CUSTOMIZED INTERFACE CONTROL SERVICES
KOOKC 三茂集團
中科院技術賦能，定制助劑領航材料創新
依托中國科學院寧波材料技術與工程研究所的全球領先技術平臺，我們提供個性化定制
助劑服務。實驗室提供界面分析和力學性能驗證，助您以更低成本實現材料性能突破。
Relying on the world-leading technology platform of the Ningbo Institute of Materials Technology & Engineering,
CAS, we offer personalized customized additive services. The laboratory provides interface analysis and
mechanical performance verification to help you achieve material performance breakthroughs at a lower cost.
Empowered by technology from the Chinese Academy of Sciences, our custom additives
lead the innovation of materials
KOOKC 三茂集團
三茂新材料科技（無錫）有限公司
SANMAO NEW MATERIALS TECHNOLOGY (WUXI) CO., LTD
地址：無錫市惠山區堰橋街道北惠東路12號
電話：13961631516
網址：www.kookc.cn
電子樣冊 銷售微信 Electronic brochure
企業官網 Sales WeChat Enterprise website
NO. 12, BEIHUI EAST ROAD, YANQIAO SUBDISTRICT, HUISHAN DISTRICT, WUXI CITY
公司簡介
COMPANY PROFILE
