国产真实乱人偷精品人妻,亚洲综合在线视频,波多野结衣一区二区AV,中文字幕在线观看无码,加勒比无码一区

曼德產品樣冊

PRODUCTBROCHURE

福建曼德機電工程有限公司FujianMandeElectromechanical EngineeringCo.,Ltd

Made

致力于打造質量 A產品的專業生產廠家

福建曼德機電工程有限公司Fujian Mande Electromechanical Engineering Co.,Ltd.

我司成立于2014年，深耕制冷配件領域十余年，集研發、生產及對內、外貿易于一體的專業生產廠家。專注于高品質制冷配件研發與制造，憑借成熟生產工藝、嚴謹品控體系，為國內外客戶提供穩定可靠產品與一站式制冷系統解決方案。多年行業經驗積淀，讓業務覆蓋國內外市場，以專業贏得客戶信賴。

Founded in 2014,our company hasbeen deeply engaged in the refrigeration accessoriesindustry formorethantenyears.Weareaprofessional manufacturer integrating research and development,production,and domesticand foreign trade.

Wefocuson the developmentand manufacturing of high-quality refrigeration accessories.With mature production techniquesanda strict qualitycontrol system, weprovidestableandreliableproductsaswellasone-stoprefrigerationsystem solutionsforcustomersathomeandabroad.

Yearsof industryexperience haveenabled ourbusinesstocoverbothdomestic andinternational markets,and we have won the trust of ourcustomers through our professionalism.

CATALOGUE
01球閥（黃銅）Bra Ball Valve
02膜片式單向閥 Diaphragm Check Valve
03活塞式單向閥 Piston Check Valve
04角閥（檢修閥）Angle Valve(Srvice Valve)
04回油閥 Oil Return Valve
05旋轉角閥 Rotary Angle Valve
06焊接角閥welded Angle Valve
07避震軟管（減震管）shock Absorber Hose/Vibration Absorber Hose
08干燥過濾芯 Drier Filter Core
09吸氣過濾芯 Ssutio FilterCore
09比澤爾濾芯 BitzerFilter Element
09二次油濾芯 secondary OilFiltr Eement
10液管干燥過濾器 Liquid LineDrer Fiter
10MD-DSKA 系列顆粒芯液體管路用干燥過濾器 MD-DSKA Series Granular Core Liquid Line Drier Fiter
12MD-DSCB 系列液體管路雙向固體干燥過濾器 MD-DSCB SeriesBi-Directional Solid CoreLiquidLie Drer Fiter
13MD-DSKF系列固體芯液體管路用干燥過濾器 MD-DSKF Series Solid Core Liquid Line Drier Filter
14 過濾桶 Filter Shell
15 吸氣過濾桶 suction Filter Shell
1656型系列油分離器 Type 56 Series Oil Separator
17 常規式與可拆式（法蘭式）油分離器Conventional&Demountable(Flange Type)Oil eparator
18螺旋式油分離器 spiral Type Oil Separator
19 MD-R型熱交換氣液分離器 MD-R Series Heat Exchange Accumulator
20 MD-Q型氣液分離器 MD-Q Series Accumulator
21 儲液罐 Receiver Tank

球閥 (黃銅)Brass BallValve

曼德球閥屬于手動調節截止閥，適用于雙向流動，用于冷凍、冷藏和空氣調節裝置的液體、吸氣和排氣管路。

Mandevball valvesare manual shut-off valvessuitable for bidirectional flow,and are used inthe liquid,suctionand discharge lines of refrigeration, cold storage and air conditioning systems.

特點/Feature

·全開到全閉僅需轉動1/4圈 ·閥體和閥座為焊接工藝 ·雙向流道 ·波形式彈簧內置，減少流體內漏 ·采用復合PTFE密封帶 ·外部檢測口可帶或不帶

·Only1/4 turn from fullyopen to fullyclosed ·Valve body and seatare manufactured bywelding process ·Bidirectional flow passage ·Built-in wave spring to reduce internalfluid leakage ·Equipped with composite PTFE sealing tape ·With orwithout external access port

技術參數 echnical parameters

·閥體最大使用表壓力：4.8Mpa
·使用介質溫度： - 5 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C
·使用介質：R22，R507，R404a等各種氟利昂制冷劑

·Maximumworkinggaugepressureofvalvebody 4 . 8 \mathsf { M p a } ·Operatingmedium temperature: - 5 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C ·Applicablemedia:VariousFreonrefrigerantssuchasR22,R507,404a,etc.

膜片式單向閥 DiaphragmCheckValve

此單向閥采用磁性膜片式設計，應用于氟利昂制冷系統，內部采用導向裝置、自吸機構設計，從而使單向閥不受安裝角度限制和反向壓力大小影響，使閥門自動閉合。

Thischeck valveadoptsamagneticdiaphragmdesignandisusedinFreonrefrigerationsystems.Itis internally equippedwithaguidingdeviceandaself-priming mechanism,sothatthecheckvalveisnotafectedbyinstalation angle orback pressure,allowing the valve toclose automatically.

特點/Feature

·復合膜片設計
·整體紫銅管，消除外漏隱
·閥體中裝有過濾網，兼?zhèn)渲够亻y和過濾器的功能
·制作工藝：無焊接，沒有燒傷膜片，磁條退磁的隱患·逆向泄露小
·極小流通阻力，大流量，基本可忽略管損壓力

·安裝位置不受限制

·Composite diaphragm design L
·Integral brass tube toeliminate externalleakagerisks
·Equipped withafilterscreen inside the valvebody,functioning as bothacheck valveandafilter
·Manufacturing process: nowelding,no risksof diaphragmdamage or magneticstripdemagnetization
·Lowreverse leakage
·Extremelylowflowresistance,largeflowcapacity,negligible pipeline pressure loss
·Unrestricted installation position

技術參數 「echnical parameters

·適用HCFC、HFC制冷劑·適用介質溫度： - 4 0 ^ { \circ } C ~ + 1 3 0 ^ { \circ } C ·最高工作表壓力：4.6MPa·最小開啟壓力：0.02MPa

·Suitablefor HCFCand HFC refrigerants ·Applicable medium temperature:-40℃\~+130℃ ·Maximum working pressure:4.6 Mpa ·Minimum cracking pressure: 0.02 MPa

活塞式單向閥

PistonCheckValve

此單向閥主要用于氟利昂系統中：冷凍、冷藏系統和空氣調節裝置的供液管路、吸氣管路及熱氣管路等制冷系統管路。

Thischeck valveismainly used inFreon systems:refrigeration,cold storagesystems,and refrigerationsystempipelinessuchasliquid supply lines,suction lines,and hot gaslinesofair conditioning units.

特點/Feature

·保持流體通道唯一流向，防止逆流

·形式：直通式和角式

·閥體內置減震彈簧

·接口：螺口和焊口

·Maintainsunidirectional flow of the fluid passage and preventsbackflow

·Types:straight-through type and angle type

·Built-in damping spring in the valve body

·Connections:threaded and welded

技術參數

Technical parameters

·適用大多數HCFC和HFC制冷劑：如R22、R407C、R134a、R404A、R507、R410A等

·適用介質溫度： - 5 0 ^ { \circ } C ~ + 1 4 0 ^ { \circ } C

·最高工作表壓力： 4 . 6 \mathsf { M P a }

·Suitable for most HCFCand HFCrefrigerants,suchasR22,R407C,R134a,R404A,R507,R410A,etc. ·Applicable medium temperature: - 5 0 ^ { \circ } C ~ + 1 4 0 ^ { \circ } C
·Maximum working pressure:4.6 MPa

角閥 (檢修閥） AngleValve (ServiceValve)

·最大使用表氣壓力：4.5Mpa，液壓：6.8Mpa;
·使用介質：R22、R502、R407c、R410、R134a、R404a等各種制冷劑及各種冷凍油；
·使用流體介質溫度： - 4 0 ^ { \circ } ~ 1 4 0
·參照標準：GB/T7245-1994.
·Maximum working gauge pressure:4.5MPa (gas),6.8 MPa(hydraulic)
·Applicable media:VariousrefrigerantssuchasR22,R502,R407c,R410,R134a,R404a,aswellas variousrefrigeration oils
·Operating temperature offluid media:-40oC\~140C
·Reference standard:GB/T7245-1994

技術參數

回油閥 Oil Return Valve

技術參數 Technical parameters

旋轉角閥 Rotary Angle Valve

特點/Feature

·最大使用表壓力：4.8 Mpa
·使用介質溫度： - 4 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C
·使用介質：R22,R134a,R404a等各種制冷劑

·Maximumworking gauge pressure:4.8Mpa ·Operating medium temperature:-40℃\~150℃ ·Applicable media:Various refrigerants suchas R22,R134a, R404a,etc.

加液接頭可以按客戶要求采用任何一種方式設置在左，中，右。The liquid filling portcan beinstalledon theleft,center,orright side as percustomerrequirements.

焊接角閥 WeldedAngleValve

特點/Feature

·最大使用表壓力：4.8Mpa
·使用介質溫度： - 4 0 ^ { \circ } C ~ 1 5 0 ^ { \circ } C
·使用介質：R22,R134a,R404a等各種制冷劑

·Maximumworking gauge pressure:4.8Mpa ·Operating medium temperature: \angle 4 0 ^ { \circ } C \~150°℃ ·Applicable media:Various refrigerantssuchas R22,R134a, R404a,etc.

技術參數 Technical parameters

加液接頭可以按客戶要求采用任何一種方式設置在左，中，右。The liquid filling portcan beinstalledon theleft,center,orright side aspercustomerrequirements.

避震軟官(減震管)VibrationAbsorberHose/(ShockAbsorberTube）

曼德避震管是由深度褶皺的不銹鋼制作而成，用以增加管子的靈活度和吸收震動的效果。選擇有極好彈性和吸震能力的波紋管，在外表面緊密覆蓋高強度的保護網套，以提供產品極高的耐壓力，經過金屬環加固后，與銅接管可靠連接成一體。故該產品具備較好的吸震、承壓能力。

Mndvibatdsflidfit elastioi ftegalr pressure-bearing capacity.

技術參數 Technical parameters

·介質溫度： - 4 0 ^ { \circ } C ~ + 1 5 0 ^ { \circ } C ·最大工作表壓力：見表格·氮?dú)庠噳海?{ \bf 6 . 0 M p a } 保壓時間：30s，塑封獨立盒裝·適用CFC、HCFC、HFC及對應的油，可選配適用CO2和R410A的避震管

·Mediumtemperature: * 4 0 ^ { \circ } C ~ + 1 5 0 ^ { \circ } C
·Maximum working pressure:See the table
·Nitrogen pressure test: 6.0 MPa,holding time:30s,individually plastic-packed box
·SuitableforCFC,HCFC,HFCrefrigerantsandcorespondingoils;ersionsforCO2andR4Aareavailableasotions

曼德接受不同長度和尺寸的定制

干燥過濾芯 DryingFilterCore

包裝：金屬罐或防水袋，密封性好，能防止異物進入，濾芯：吸氣濾芯和干燥濾芯。

Packaging:Metal cans orwaterproof bagswith good sealing performance to prevent foreign matter from entering. Filtercores:Suction filtercoresand drier filter cores.

特點/Feature

·密封：金屬罐沖氮?dú)饷芊?，防水袋抽真空密封·制冷劑及冷凍油均可無損通過·中空式設計，任何方向都能高效過濾·性能：吸水，吸酸，吸雜質，吸油污

·Sealing:Nitrogen-filled sealing formetal cans,vacuum sealing for waterproof bags ·Allows refrigerants and refrigerationoils to pass through without damage ·Hollowdesign forefficientfiltration inany installation direction ·Performance:Absorbsmoisture,acid,impuritiesand oil contaminants

吸氣過濾芯 SuctionFilterCore

比澤爾濾芯 BitzerFilterElement

二次油濾芯 SecondaryOilFilterElementDrierFilterCore

尺寸：外徑\*高度 9 3 ^ { \star } 1 4 0 \mathsf {mm }
材質：不銹鋼濾網
作用：48型油濾芯
Dimensions:OuterDiameter\*Height 9 3 ^ { \star } 1 4 0 \mathsf {mm }
Material:StainlessSteelFilterMesh
Application:Type48 Oil Filter Element

液管干燥過濾器 LiquidLineDrier-Filter

技術參數 Technical parameters

·對于CFC系統，建議使用加活性氧化鋁干燥過濾器。在這些系統中，有可能需要使用具有吸酸性能的干燥過濾器?！?duì)于系統中的油含有添加劑時，不建議使用含有活性氧化鋁的干燥過濾器。

·For CFC systems,the use of drier filters with activated alumina is recommended.In such systems, drierfilters with acid absorption properties may be required.
·Whentheoilin the systemcontainsadditives,theuse ofdrierfilters containing activated alumina is not recommended.

MD-DSKA系列顆粒芯液體管路用干燥過濾器

MD-DSKASeriesGranularCoreLiquidLineDrier-Filter

DSKA系列干燥過濾器采用了高品質的3A球形分子篩，并且在筒體內經過自動壓縮與高密度濾網結合，達到干燥過濾的作用，能有效過濾系統中殘留的水分和雜質。

TheDSKA Series filterdriersadopt high-quality3A spherical molecular sieve,which isautomatically compressed inside the cylinderand combined witha high-density filterscreentoachieve drying and filtration,effectively removing residual moisture and impurities inthe system.

印

MD-DSCB系列液體管路雙向固體干燥過濾器

MD-DSCBSeriesBi-DirectionalSolidCoreLiquidLineDrier-Filter

DSC系列干燥過濾器，采用了高品質的3A分子篩顆粒燒結成的模塊，與高密度濾網布結合，兩端各安裝了一個不可逆流的閥，可在逆向時攔截雜質，達到干燥過濾的作用，能有效過濾系統中殘留的水分和雜質。

DSCseries filterdryer,the use of high quality 3A molecular sieve particlessintered module,combined with high density filtercloth,both endsof the instal-lationof a non-reverse flowvalve,caninterceptimpuritiesin thereverse,toachieve theroleof dry filtration,can effectively filter the residual water andimpurities in the system.

MD-DSKF系列固體芯液體管路用于燥過濾器

MD-DSKFSeriesSolidCoreLiquidLineDrier-Filter

該過濾芯由 8 0 % 3 A 分子篩和 20 % 活性氧化鋁制成，對運行在高冷凝溫度和需要大的干燥能力的系統是完美的芯體混合物，可以最佳地用于燃油和烷基苯油一起使用的CFC和HCFC制冷劑(R22R502等)可以與HFC及制冷劑兼容。

The core ismade of 80%3Amolecular sieve and 20 % activated alumina.Itistheperfect core mixture for systems operating at high condensation temperatures andrequiring large dryingcapacity.Itcan beoptimally used for fuel and alkylben-zeneoilsused togetherwith CFC and HCFC refrigerants (R22R502,etc.) and compat-iblewith HFC and refrigerants.

技術參數 Technical parameters

過濾桶 Filter Shell

安裝位置：（氟利昂或氨）制冷系統液、汽、油管路，可除去水分、酸與殘留的污染物，從而使壓縮機得到更好的保護，延長其使用壽命。

Installation location: Liquid, vapor and oil pipelines of (Freon or ammonia) refrigerationsystems.lt canremovemoisture,acidsand residual contaminants, thus providing better protection for the compressorand extending its service life.

特點/Feature

·濾筒表面經過耐腐蝕噴塑處理，采用耐腐蝕環氧樹脂靜電噴塑，可在任何酸堿環境下使用
·蓋板為鋼或鋁(按客戶的要求)
·無縫管筒體，堅固的銅接口或碳鋼接口(按客戶的要求)
·蓋板裝有測量壓力降和充注用的1/4NPT檢修口 (客戶可自行安裝角閥)
·防銹法蘭板、專利設計濾芯支架和鍍鋅彈簧便于濾芯更換
·最大工作表壓力為3.8Mpa，最大工作溫度為 + 1 3 5 ^ { \circ } C
·濾筒有效過濾系統內雜質、吸收水分和酸性物質，安裝D-48/H-48或D-100/H-100固體 干燥濾芯 ·Thesurfaceofthefiltercartridgeistreatedwithcorrosion-resistantplasticspraying,usingcorrosion-resistantepoxyesin electrostatic spraying,enabling use in any acid or alkaline environment.
·Cover plate made of steel oraluminum (as percustomer requirements).
·Seamless tube body with sturdy copper or carbon steel connections (as per customer requirements).
·Thecoverplateisequippedwitha1/4NPTserviceportforpressredrop measurementandcharging (customerscaninstall angle valves on their own).
·Rust-prooflangeplate,patentedfiltercorebracketandgalvanizedspring facilitateeasyfiltercorereplacement.
·Maximum working pressure:3.8 MPa,maximum working temperature: +135C.
·Thefiltercartrdgeeffctivelyfiltersimpuritiesabsorbsmoistureandacidicubstancesintheystemndisfitedwith-48/ H-48 or D-100/H-100 solid desiccant filter cores.

技術參數 Technical parameters

ill.

吸氣過濾桶 SuctionFilterDrum

吸氣過濾桶安裝在系統的液、汽管路中，可除去水分、酸與殘留的污染物，從而使壓縮機得到更好的保護，延長其使用壽命。

Suction filterdriersare installed in the liquid and suction lines of thesystem to remove moisture,acidsand residual contaminants,providing better protectionforthe compressor and extending its service life.

特點/Feature

·筒體表面經過耐腐蝕噴塑處理，耐腐蝕環氧樹脂靜電噴塑，可在任何環境下使用
·蓋板為鋼或鋁(按客戶的要求)
·耐久的堅固鋼殼，堅固的銅接口或碳鋼接口(按客戶的要求)
·裝有測量壓力降和充注用的1/4NPT檢修口
·防銹法蘭板、專利設計的濾芯支架和鍍鋅彈簧便于濾芯更換
·作壓力為34.5Bar最大工作溫度為 + 1 3 5 ^ { \circ } C

·安裝在吸氣管路上

·作為吸氣管過濾筒時，為有效過濾系統內雜質，避免臟物進入壓縮機，安裝x-48/×-100纖維百褶濾芯或F-48/F-100 不銹鋼濾芯

·Thecylindrfiaditoiisiossiispbe for use inany environment.
·Cover plate is made of steel or aluminum (as percustomer requirements).
·Durable solid steel shell with robust copperor carbon steel connections (as per customer requirements).
·Equipped witha1/4NPT service portforpressure dropmeasurement and charging.
·Rust-proofflange plate,patented filter holderand galvanized spring foreasyfilter replacement.
·Working pressure:34.5 Bar,maximum operating temperature: + 1 3 5 ^ { \circ } C
·Installed in the suction line.
·WhenusedassuctionlinefilterdrierinstallX-48/X-100pleatedfiberfilterelementsorF-48/F-100stainlesssteelfilter elements toeffectivelyfilterimpuritiesinthesystemand preventcontaminantsfromentering thecompressor.

技術參數 Technical parameters

56型系列油分離器 Type56SeriesOilSeparator

工作原理 Working Principle

工作原理：制冷劑和冷凍油進入油分離器，帶有懸浮油顆粒的氣態制冷劑與螺旋型鋼刷相接觸，并且沿氣道旋轉流動。油顆粒在離心力的作用下，被分離到筒形氣道的筒壁上，同時螺旋型鋼刷對油顆粒還具有吸咐分離作用，被分離出來的油顆粒聚集成較大油滴流入油分離器底部油收集區。并通過此處安裝的浮球式針閥將油返回到壓縮機曲軸箱或儲油器中

·設計壓力： 2 . 9 M P a ·適用制冷劑：R134a、R22、R407C、R404A、R507A。

Working Principle

Refrigerant and refrigerationoil enter the oil separator. Gaseous refrigerant containing suspended oil particlescomes into contact with the spiral steel brush and flows rotationally along theair passage.Under the action of centrifugal force,oil particlesare separated onto the wall of thecylindrical air passage.Meanwhile,the spiral steel brush also adsorbs and separates oil particles.The separated oil particles gather into largeroil dropletsand flow into the oilcollection area atthe bottom of the oil separator.The oilis returned to the compressorcrankcase oroil reservoir through the float-type needlevalve installed here.

·Design Pressure:2.9MPa ·ApplicableRefrigerants:R134a,R22,R407C,R404A,R507A

技術參數 Technical parameters

常規式與可拆式(法蘭式)油分離器

Conventional&Demountable (Flanged) OilSeparator

技術參數 Technical parameters

·介質溫度： - 4 0 ~ + 1 2 0 ^ { \circ } C
·最大工作壓力：31Bar
·爆破壓力：190Bar
·儲油量：55833-559011/5301-5305600毫升，569011-569417/6303-63051000毫升
·噴塑厚度：50-80um
·MediumTemperature:-40\~+120C
·Max.working pressure:31Bar
·Burst pressure:190 Bar
·Oil storagevolume:55833-559011/5301-5305600ml,569011-569417/6303-63051000ml
·The thickness of paint film:50->80um

螺旋式油分離器 SpiralOilSeparator

工作原理 Working Principle

制冷劑和冷凍油進入油分離器，帶有懸浮油顆粒的氣態制冷劑與螺旋型鋼刷相接觸，并且沿氣道旋轉流動。油顆粒在離心力的作用下，被分離到筒形氣道的筒壁上，同時螺旋型鋼刷對油顆粒還具有吸附分離作用，被分離出來的油顆粒聚集成較大油滴流入油分離器底部油收集區。并通過此處安裝的浮球式針閥將油返回到壓縮機曲軸箱或儲油器中

RefrigerantandrefrigerationoilentertheoilseparatorGaseousrefrigerantcontainingsuspendedoilparticlescomesintocontact withthespiralstelbrushandflowsinarotatingmanneralongtheairpassage.Undertheeffectofcentrifugalforce,oilparticleare separatedontotheinnerwallofthecylindricalairpassage.Meanwhile,thespiralstelbrushalsoadsorbsandseparatesoilarticles. Theseparatedoilparticlesgatherintolargerdropletsandflowintotheoilcolectionareaatthebottomoftheoilseparatohilis thenreturned to thecompressorcrankcaseoroil reservoir throughthefloat-type needle valve installed here.

MD-R型熱交換氣液分離器

MD-RSeriesHeatExchangeAccumulator

工作原理 Working Principle

制冷系統中，制冷劑管路可分為高壓與低壓，高壓制冷劑溫度較高，需要冷凝器冷卻，而經過蒸發器低壓制冷劑相對溫度較低，需要?dú)庖悍蛛x器來分離氣態與液態，液態的制冷劑則需要升高溫度而蒸發，成為氣態后才進入壓縮機，避免液擊，以延長壓縮機的使用壽命。

Inrefrigeratiotmfrgeratlinscandedintgressuredlopsurds.Hiressrefrigerantslatiely hightemperatureandeedstooledycondenserLopressreefrgerantexitingteevaporatrhaslowertemperaturendie agas-liquidseparatortosepaatevapondliquidases.Liqudefrgerantmusteatedndpodintogaseforenteringthoressor to preventliquid slugging,thereby extending theservice life of the compressor.

特點/Feature

·耐久的堅固鋼殼體
·高耐腐蝕噴塑處理
·最大工作壓力：2.9Mpa，爆破試驗175Bar
·推薦在蒸發溫度低于 + 5 ^ { \circ } C 的制冷系統中安裝熱交換器適用HFC、 HCFC、CFC制冷劑和它們相應的油
·Durable heavy-duty steel shell
·High corrosion-resistant plastic spraying treatment
·Maximum working pressure 2 . 9 M P a ,burst test:175 bar
·Itis recommended to installa heat exchangerin refrigeration systems with evaporation temperatures below+5C.Suitable for HFC, HCFC,CFCrefrigerantsand their corresponding oils.

MD-Q型氣液分離器

MD-QTypeGas-Liquid Separator 工作原理 Working Principle

制冷系統中，制冷劑進入壓縮機前必須將氣態和液態分離讓氣態制冷劑進入壓縮機，壓縮機才不會受到液擊，液態制冷劑留在氣分內，氣液分離器的U型回氣管底部有多個回油孔，油隨氣態制冷劑一起回到壓縮機中。有了氣液分離器的保護，壓縮機的壽命才會更長久，系統循環才會更正常。

Iarfrigertidldrtaaeofrosoloset toflowintotmptidiu Ushapedetusirtitet theservicelifeofthecompressoris prolonged and thesystemcycleoperatesmore reliably.

特點/Feature

·防止液擊，控制液態制冷劑回流;
·最大流量與最小壓力降設計；
·用于HCFC與HFC的制冷劑及其油;在進口處印有"in”；
·內部回氣管采用"U"設計；
·耐高腐蝕表面噴塑處理；
·最大工作壓力：31Bar，爆破壓力：190Bar.介質溫度-40-120℃;
·Prevents liquid slugging.controlled liquid return
·Designed maximum flow and minimal pressure drop
·Use with HCFC and HFC refrigerant and with associatedoils
·Stamped "in"at the postion of inlet
·Designed"U"shage for return tube
·High corrosion-resistant paint coating finish
·The max working pressure 31Bar,the burst pressure190Bar,the medium temperature-40-120"C

儲液罐 ReceiverTank

工作原理 Working Principle

儲存供給蒸發器的液體制冷劑。當系統維修時，儲液器也能回收且儲存系統中部分制冷劑。

儲液器容積大小根據設備中制冷劑充注量來確定，可根據系統的要求進行選擇。

Stores liquidrefrigerantto supplythe evaporator.During systemmaintenance,the receiver canalsorecoverand storepartoftherefrigerantin thesystem.

Thevolumeofthereceiverisdetermined according totherefrigerantchargeoftheequipment and can be selected based on system requirements.

特點/Feature

·結構：立式、臥式；

中自1.

·可選用：視液鏡、浮球、閥、安裝支架、安全閥接口、易熔塞：帶有PTFE閥門密封墊片：
·高度耐腐蝕的表面噴塑處理，可以在所有環境下使用，包括海洋應用；制冷劑：HFC、HCFC、CFC制冷劑及相應的冷凍油： ·最大許可工作壓力：3.5Mpa:爆破壓力:190Mpa:
·許可工作濕度： { \boldsymbol { - 4 0 } } { \boldsymbol { ~ } } 1 0 0 ^ { \circ } { \mathsf { C } } ：
·可需據客戶的特定需求設計制造特殊的儲液器; ·Structure:Vertical and horizontal types;
·Optionalaccssoslafoatallvoigeterfuiblegitht; ·Highly corosion-resistantplastic-sprayedsurface,suitable foruseinallenvironmentsincluding marineapplications; ·Refrigerants: HFC,HCFC,CFC refrigerants and corresponding refrigeration oils;
·Maximum allowable working pressure:3.5 MPa; Burst pressure: 1 9 0 \mathsf { M p a } ;
·Allowable working temperature: - 4 0 ~ 1 0 0 ^ { \circ } \mathsf { C } ; （204號
·Special receiverscan be designed and manufactured according to customers'
specific requirements.

儲液超熱熱交換器(三合一)

Receiver-Superheat-HeatExchanger(Three-in-One)

特點/Feature

·耐節省用電：將舊式低壓液分離因滴水而浪費的冷度和電力完全回收到 高壓儲液裝液體內而增加冷度，又節省用電。
·增加冷凍效果：因高壓儲液器和低壓氣液分離器內的冷媒，進行熱交換 而產生過冷卻和適當過熱，使循環中的冷媒焓值增加，在蒸發時能發揮 到最大冷凍能力。
·確免液壓縮，確保沒有液體回流到壓縮機中引起滿壓縮。
·不滴水免保溫。
·省工省料省空，增加價值感，提升整機美觀，沒有滴水，發霉發臭，污 染周圍環境的現象。 ·nergysavingRostliapacitdoweasdripgaditoloprurelidepaaorstugeely to the high-pressure receiver toenhance cooling effect and reduce power consumption.
·ImprovedrefrgeratiopefoanceHateagteefrgeantineigresurereceveandopressuregs-lqdepaaducs subcolingandroersuperhatincreasingthnthalyfciculatingrgeratndmaximingrgeratioapacityuringvapoatio ·Preventsliquidslugging,ensuringnoliquidrefrigerantflowsbackintothecompressortocauseliquidfloodbackdamage.
·No dripping,noinsulationrequired.
·Labor-saving,material-savingand space-saving,enhancing overallvalue and appearance.
·No dripping,mold,odororenvironmentalpollution.

技術參數 Technical parameters

福建省福州市臺江區鰲峰街道鰲江路8號福州金融街萬達廣場二期A1